AT&T Synapse Guide d'installation télécharger pdf (Page 32)

Synapse Installation Guide Back to Contents

Installation 31

Gateway and ATA Placement

You can place the Gateway or ATA on a tabletop, mount it into a standard 19-inch metal

rack, or wall mount it. The PSTN Gateway must be installed within three feet of the

building ground point. Install each device using the following instructions.

Rack Mounting

To mount the Gateway or ATA into a standard 19-inch rack:

1. Remove the two mounting brackets and six screws from the packing tissue.

2. Position a bracket at the front of the device.

3. To align the screw holes, place the bracket on the device so that the locating indent

on the bracket matches the indent on the device.

4. Insert each of the three screws into the holes provided and tighten securely. Repeat

the process for the other bracket.

5. Position the chassis into the 19-inch metal rack.

Locating Indent

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 167 168

Pas de commentaire

AT&T Synapse Guide d'installation Page 32