AT&T MERLIN II Attendant Guide de l'utilisateur télécharger pdf (Page 9)

THE MERLIN II

ATTENDANT UNIT

unavailable, the caller is taken off hold and the Transfer Fail

announcement is played. The number of rings (2 to 6) allowed before

a call is transferred from the first (primary) extension to the secondary

extension is a programmable setting, see “Call Processing Options” in

Section 2, ‘Changing the Current Setting”.

●

If a secondary extension is not programmed, the caller hears the

Transfer Fail announcement when the route or extension dialed is

busy or does not answer.

NOTE:

During a supervised transfer, the MERLIN 11 Attendant cannot

answer another call until the call in progress is successfully

completed or the caller hangs up.

There are three lights on the front of the MERLIN II Attendant unit (Figure

l-l):

● power

This light indicates that the unit is powered on.

● battery

Table 1-1 describes the meaning of the different light combinations when

ac power is connected to the MERLIN II Attendant:

TABLE 1-1 MERLIN II Attendant Front Panel Lights.

Power Battery

Light

Description

Off

Battery charging

Battery fully charged

Off On

Unit operating on battery power

Off

Unit not operating; refer to “Troubleshooting”

Blinking

Out of Service code; refer to “Troubleshooting.”

The battery is fully charged after 18 hours of continuous ac powered

operation.

● talking

Lights when the MERLIN II Attendant answers and monitors a call.

The MERLIN II Attendant 1-5

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 28 29

Pas de commentaire

AT&T MERLIN II Attendant Guide de l'utilisateur Page 9